Tuesday, 6 September 2011

HKS Logo

Having fitted and not to mention invested a plentiful amount of my hard earned cash into HKS products only to have them hidden away in the depths of my engine. I have purchased a rather nice badge.

90x22mm in size
As you can see it is of the HKS logo (well duh!) and comes with a sticky backing. the only thing to decide now is exactly where to stick it (no rude suggestions please!).

It even comes with some excellent instructions which I will share as follows.

1. Clean be posted on the surface of the stains
2. Separate off back plastic film and
3. Select the right location and paste

Thank goodness they included these or I could have been in trouble! I wonder if their turbo kits are as easy and concise! Happily that isn't me who is fitting.

Skyline Nismo Oil Filler Cap

To make the world a more beautiful place under my bonnet I have decided to invest in a NISMO oil filler cap. Currently Ms Skyline wears a HKS styled one and although I like it a lot I decided that I could probably do with a spare just in case when at a show someone steals it! Yes these people do exist!

I was surprised at how expensive a NISMO oil cap is actually and they retail around the £70 mark (€80 US$113)
Rather Sexy?
I was 'lucky' and managed to find a fine fellow who was abandoning his project build, selling off all his parts and picked this up for a not inconsiderable (but a bit cheaper) £50.00 I can justify this spend under the 'I need one' category!

The part is PN 15255-RN012. It is made from machined aluminum, polished to a very high standard. The blue tag you can see in the picture is to peel off the backing from the actual Nismo badge so that you can position it correctly when actually fitted to the car (you won't want the badge upside down now!). The logo/top face is also protected by plastic film and although tempting I will not peel this off until it is fitted to the car!.

All in all a very good purchase which I hope will go well with the chromed internals on the car.

Will just have to wait and see on the next post!



Saturday, 3 September 2011

The next Interceptor?

As many of you already know, Ms Skyline has always been heavily influenced by the cars from the original Mad Max films. I never fancied a big old ugly V8, thinking the straight 6 probably the most wonderful engine ever to be produced! However that said, who could resist the Pursuit Special (later to have the title of 'Interceptor') with it's big old pointless pretend blower howling louder than the sirens, it was enough to make this teenager become all he could be...

As with all things, the flavours from our past come back to haunt us. Usually in a third rate 3D badly scripted film! The thing with the Mad Max movies was that they were about the 'car' a celebration of all things wheeled really. Well from the original Ford Falcon XB now we can bang right up to date with the new concepts that Ford are pushing out.

Enjoy

Friday, 2 September 2011

Powder Coated Wiper Arms

Whilst preparing the car for the Jap Bash show and giving it a bit of a wash. I managed to blast a small amount of paint off the rear wiper arm. Upon closer inspection I could see that this at some point in its life had been painted/blown over by some enthusiastic hobbyist.. (badly) Am reasonably certain it wasn't me..

When I first had the car there was some small damage on the drivers side wiper arm, the passenger side looking not exactly sorry for itself but certainly wasn't in the first flush of youth. So I had removed these, roughed them up a little and given them a blow over of 'car spray' black satin. This quick fix was still holding up well, but naturally I can't be happy with a quick fix! When I last went to the powder coaters for the grille and strut ends, it was my idea that I would get all the wiper arms done, however being in England wipers are most useful seeing as it rains here... a lot. So they are kind of useful on the car! I did consider going to the expense of getting a spare set, but again being a bit of a Skyline nut I already have an impressive collection of worn out/new/damage/half repaired parts and could probably do with the space!

Now I had managed to blast off some of the paintwork on the rear arm, I decided that there was no time like the present and whipped off all the arms. I work quite near to Thatcham and popped into Thatcham Powder Coatings Unit 3/Pipers Ind Est/Pipers Lane, Thatcham 01635 873 055
hoping to get lucky and they kindly said they would turn them around in a week.

Thatcham Powder Coaters
True to their word the parts were ready on Friday (today). I would have said it seems excessive to get these powder coated when you could just 'touch up' with a spray can. However 'in the flesh' they look like new items.. brand new items. I think you would have to agree that would be rather rare on a car of this age now!

In general I am delighted with them and have that boyish feeling of not being able to hardly wait to get home and fit them back to the car!  Joy of joys is that I am really busy at work at the moment doing something that no one else can do and working to a dead line of today. So I will need to put away my toys until later this evening. It's at this point I remind myself that without the work there would be no car and take pleasures from the small things!
The finished product
To get the three arms grit blasted and power coated in a satin black finish cost £30.00 in total. Not enough to be massively expensive but just enough not to be cheap!

Bet you can all probably guess what my next post will be?

Wednesday, 31 August 2011

Jap Bash 2011

Upcoming Events:

Japbash! Held at Bentley Wild Fowl Trust in West Sussex UK.

When: Sunday 4th September 2011.

 'These meets have been a great success and we are pleased to be returning again this year. Bentley Wildfowl and Motor Museum currently hold over 20 car shows a year and continue to be perfectly suited for an event like Japbash.'

Reading Jap Car meet

When: Tuesday 20th September 2011 Madjeski Stadium Reading.

Replacing the horn Beep-Beep!

A side effect of fitting the Skyline option Spec 2 grille, is that you can see through the mesh of the grille into the car. Now obviously there isn't all that much to look at in there, a bonnet release, a bit of radiator and the horns are just about visible. It becomes much more apparent when popping the bonnet to reveal all.
As it stands under the hood especially at the front of the car, things are not in too bad a shape. I removed my very manky and rusty bonnet catch for one that I had refurbished some weeks ago. So that was good. However now my eye was drawn to the original horn fittings, which were looking tired and worse for wear. Quite understandable as these are by design, front and weather facing. In short, something had to be done to beautify this area.

 The old fittings are pretty simple and straight forward to get at. Each horn has one electrical connector and is held in place by a bracket connected with one bolt to the central support for the bonnet catch. Simply remove the connectors and unbolt the two M12 bolts.

The replacement horns came complete with some brackets which could be bent into shape. Keeping the trumpet part facing down (so water etc. can't get in), they horns were test fitted.


The replacement units were from Ring Automotive and can be seen here the pack comes with the parts needed but no wiring. Also there is a relay supplied, but this is not required on this installation.
Wiring is actually simple. If you check out your front engine bay fuse box you will see that there is a relay for the horn, delivering 12V every time you 'honk'. There is nothing super special about the replacements, although they do need to be suitably earthed. Having worked this out it is simple to attach an earth wire of suitable thickness (17/21 amp) following the existing cable back to a suitable termination point.
As you can see in the picture, I even kept the original Nissan terminals for the live connectors.

Okay, so now the wires are done and the brackets are 'bent' all that was needed is a quick clean up of the finished area. The horns were bolted into place and given a test 'beep' to make sure that they were working.


The finished result is quite pleasing and in total I would suggest it took me a couple of hours to do total.

Things you will need.
Horns.. duh!
Electrical connectors 2x spades, earth and splitter.
Suitable wire
12mm spanner and a crimp tool.

Tuesday, 30 August 2011

GTST Spec 2 Indicators

I may have touched on this simple upgrade in the past. But on the weekend (we had a nice long one) My friend (Dr Evil) popped round to see if we could make his indicators (or as the say in Japan 'Winkers' or repeaters) a little less 'in your face'.
I have seen conversions done on the indicators before where the lens has been replaced with some other lump of plastic, usually hacked out of a strip light cover. I myself did experiment with a old fog light lens, grinding away all of the surrounding glass and cutting the amber portion away from the indicator. However both of these methods are unsatisfactory and I'm big headed enough to say that as an experienced model maker you need better tools for the job!
Standard GTST Spec 2 Indicators
I have heard of a mythical after market set of front indicators that actually come with a clear lens. But until the day I touch it with my finger and go 'ooooh' this will have to remain a myth.

After Tinting with film.
Actually there is a third option.. This would be to fit the four door version of the indicators (which are kinda clear). These look very similar to the older Spec 1 indicators (see the four door posting). Only down side to doing this would be getting hold of some as they are rare. Even though I did manage to get some they are no good to me as they come with a grille that fills the lower air intake. Alas I have the NISMO front splitter style on my car which would preclude this from being feasible. I have still kept the parts just in case I go mad and change the nose in the future.

Anyway, if you look at the pictures you will see that the simplest and most effective way of 'taming' the indicators is to simply use some window tint film.
Make a template from paper, tracing around the indicator lens (remember it's not perfectly round).
Give lens a good clean.
Cut out two circles from your tint film (remembering right and left hands)
Squirt some slightly soapy water on lens (so you can slide the film into position)
Remove air bubbles etc, with a credit card or similar (place masking tape over the edge)
Use a hair dryer to conform the film around the edges of the lens.

Job done. Your car is now cool!

Adds a bit of excitement to a dull street to see the Skylines!